Click on photo for more images Mike Huff's 1989 Mitsubishi ( Indio, CA) Sent in by Donna Huff of Salem, OR We bought this truck for our son on his 18th Birthday and he just turned 30. He has worked on it off and on for all these years. He has changed the appearance of it, and I think it looks great. It's a 1989 Mitsubishi Mighty Max. But the grill has been changed and he added moulded dually fenders, a ground effects kit and had a mold made of the custom bumper and air dam. We just had it painted white with blue pearl over it, and the interior and bed were completely done. He has flames sewn in the door panels and they are putting blue lights in. The flames are a combination of red, orange, and blue pinstriping. It turned out awesome.It has really wide tires on the back but still carries the original rear end and motor/trans. He removed the gas filler and rerouted it inside near the tailgate, which by the way is louvered and moulded. He made one of the original hide-a-way hitches that open up. Polished aluminum wheels. Next project is air bags.

"Ole Blue" "Ole Blue" is a 551st series Chevy p/u. I restored it to original about 8 years ago. Last spring I decided to upgrade it to late model specs. i.e. '82 Monte Carlo IFS, disc power brakes, saganaw power steering, 327eng (350Hp), Hedman hedders, Flowmaster mufflers, 2 1/2 in. stainless pipes, 700R4 tranny, Impala posi rear (3.38 gears), 235/70/R15 rear, 235/60/R15 front and '74 Chevy p/u tilt steering column. I am very satisfied with the way everything turned out. It was a lot of hard work but worth every minute of it. On road test got 18.5 mpg. running 65 to 70 mph @ 2050 to 2100 rpm. Passing gear (direct) awesome at this speed. Comments welcome. BowTieMax@webtv.net

Clay Croghan's 1956 Chevy 3100 Stepside Clay bought this truck in August 2001 from Memory Lane Motors. It had been completely restored from the frame up, featured a mild 327 c.i.d., P.B., P.S.w/tilt, new trim, new bed, but needed some extra touches, so he installed Mono Leafs front and rear to lower it, took out the 4 speed and added TH350 w/Shift Kit, Lokar shifter, pedals, Grant Leather Wheel, new carpet kit, etc. Still a work in progress.d

Click on photo for more images Jim Parker's '71 C-10 Stepside Hi, this is my truck. A 1971 C-10 Stepside, a work in progress. At the moment it has a 350 cubic inch engine with a turbo 400 trans w/shift kit, 373 gears, dual exhaust, diamond tucked and pearl white paint. It is MY bad ride!!! Jim from South Carolina

1963 Dodge D-100 Owners ~ Terry & Maria Krueger '63 Dodge D-100 PU with a 225 slant 6, clifford aluminum intake, 500cfm Edelbrock carb. This truck has been lowered 6". Tailgate and emblems have been shaved. Items such as the inside of the hood, grill, door panels and dash have all been powder coated. And as we can tell from the pic it sure does LOVE to burn those tires!!!!

I'VE GOT SPORT TRUCK FEVER!!!! Hey guys! Carl Melendez from Brooklyn, NY here with the sport truck fever '96 Tahoe full Denali nose conversion 20 inch Billet Specialties with matching steering wheel. Full air ride suspension by Air Ride Technoligies, full strobe package, Billet grill by Trends. Headers, Performance Cat's straightline performance mufflers, K-40 radar, alarm w/remote start,real HID lighting crome tow hooks, Cal-View sport mirrors, Hotkis sway bars(front & rear),Power Programmer and an AirRade Intake. Future Mods will be a Whipple Supercharger, rear buckets, and a full multi media sound system. Will keep u guys posted.

HERE'S LOOKIN' AT LEW JONES 1947 Chevy PU This is the happy ending of 8 long years of work. It all began with a wrecked 1947 Chevy PU. Cut the top off and chopped the windshield 3 1/2". Has a glass tilt frontend. Under the hood is boasting a Chv 360 ci, 400 hp plus 250hp NOS. With a Muncie 4 spd it can really attract some attention.

Click on photo for larger image Larry & Carolyn Perreira's '72 Bronco Here are a few pictures of my '72 Bronco. I did most of the work myself and used it for drag racing. I'm going to make it street legal now. It has a 350 Chevy 30 over, 11 to 1 forged pistions, Camel back heads with 194 intake & 160 exhaust SS valves, roller rockers, Victor Jr. intake, 750 double pumper, MSD 6al, and many more it also has a turbo 350 trans, 3500 stall, Ford 9" with 4.56 gears and a mini spool. It also has a tilt front clip, and I chopped the top 4". The best time it ran was 11.85. I'm going to finish the bodywork and hopfully paint it before Father's Day. Maybe when I have finish painting it, I'll send more pictures. Thanks

Click on photo for larger image GREAT RIDE Our '48 Chevrolet Suburban has been chopped 4 inches and is sitting on a '96 S-10 Chassis. It features a 350 Chevy with a Street Performance injection, 700R transmission and lots of chrome. It was built by Mike Walker at Street Rods Only.

Click on photo for larger image W. Peck's 1933 Ford Pickup All Steel, IRS ('64 Vette), 4 Speed, 6:71 Blown 327. All Work Except Paint Done At Home. On The Road 12 Years. Bill Peck Wexford, PA

Billy Bowlin's Work-n-Progress 1979 F150, 460 CID, Edelbrock 4 BRL, Speed Pro Cam 272/282, Flowmaster Headers, 1 1/2 Inch Exhaust, Cherry Bombs, Bucket Seats, 2.73 Gears, C6 Trans, About Ready To Paint, Plan To Rebuild The 460 With A Edelbrock High Rise, Hood Scoop, Stage 5 Racing Cam, and Much, Much, More

Pro Street El Camino This is my 1978 Pro Street El Camino, 498 cubic inch BBC 800 hp. Young 4800 stall convertor; TCI race trans (turbo 350), narrowed 9" w/4.88-1 gears, spool, 4-link, coil overs, very fast and fun to drive on streets. Yes, I drive on the streets. Built and owned by Don Baker.

Marty From Pickering, Ont. Canada's 1947 International It's a Pro-Street with a 427 Chevy, Turbo 400, Dana 83/4 Rear. 3:55 Gears. Full Roll Gage, 3/4 inch Oak in box, custom rull pan & running boars, flip front-end. I would like to get in touch with other international owners. Email: binder472000@yahoo.ca

Anthoney S. Carrabino's 1957 Chevy Pickup PPG 3 Stage Pearl Paint, Oak bed w/polished stainless steel strips, TCI's custom IFS w/Coil Over shocks, TPI' Streetrod package 700R4 w/2,500 stall speed converter w/external oil cooler and filter, Chevy open chamber LS-6 454 w/750 Holley mechanical secondaries and powder coated full length headers, Custom aluminum exhaust system w/Flowmaster mufflers and chrome plated oval tips by Edelbrock. So very much more....

Nice Lookin.. '55 F100 Dennis O'Connell built his '55 F-100 at home except for machine work, upholstery, tranny and pin stripping. He says he has the only red garage in the neighborhood ! The truck has a T-Bird clip with PS and front dis brakes, C6 and 9" Posi. The engine is a 429 bored .030 over, balanced, a little Head work, Roller Rockers, Comp Cam, Hooker Headers, Ceramic Coated Edelbrock Manifold ,Edelbrock 750cfm Carb, Sw Gauges, Tilt Wheel, Pwr Windows with Hotronics Switches. Since '93 Dennis and his chief advisor and supporter (his wife) have put 30,000 miles on their truck attending about 25 shows a year.

Owners of "RacinTies.com" Geri and Hank not only sell a Rod and Race related product, they ARE Rodders ! They've had this '35 Chevy w/Flames for about 6 years and Hank is working on this '79 Coupe DeVille - turning it into a Custom. They're taking the Chevy to York and then to Indy this year...just cruisin ! You can find Hank and Geri's Line of Hot Rod and Racing Ties by visiting their website www.racinties.com They've got a nice selection.

Really Cool '37 Pickup This sharp looking '37 Ford PU has a '97 Chevy LT-1, TPSI Cam, Roller Rockers, Holley 52mmthrottlebody, 700R4, 2700 Art Carr Stall Converter, 3:70 9" Posi, Autometer Gauges, Airtique AC, Kicker Stereo, Ultra Leather Interior....and they drive it ! It went about 5000 miles last year including trips to the Nats in Louisville, Springfield and Oklahoma City.

Pace Family Latest Addition... Look at this great little pickup that Dan Pace and family have in Arvada, Colorado. It sports a 396 cu inch , 400 Turbo Trans, a Chrysler 8 3/4 Posi Rear, Power Windows and doors. It's chopped 3 inches, Chassis is powder coated the same color as the truck. They will be shooting for a lot of Rod Runs this year. Their body and paint work was done by a friend in Canada, E&G Auto Body. They are working on finishing the interior.

This Was Dads Truck..... This great looking '67 GMC remains in the family. We don't have the owners name or town but if you email us we'll give you credit for this nice looking truck.

Just Havin Fun ! Hot Rod Dan ( Dan Hagenbuch) on '98 Americruise in the Colorado Mountains. From Wichita Kansas he drive this Steel '37 Ford Convertible with rumble seat. Hey....someday we're going to do Americruise ! Looks Like Great Fun.

          GO TO:    HOME       SHOWROOM          PARTS            BUYERS GUIDE
                      HAPPENINGS        PLACE A CLASSIFIED          EMAIL US